Angled motor mounts for Diatone FPV250 quad copter by TJEmsley
See all models by TJEmsley
Download All FilesDownload Individual Parts
Description
Motor mounts with bolt hole pattern for the Daitone FPV250 airframe. Angles the motors down 10 degrees for less drag when racing.
Printing Instructions
.15mm layers, 15% infill.
Thick pieces fit between the motor and the frame, F side to frame.
Thin pieces go on the underside of the frame, f side to frame, to align the bolts with the upper wedge.
Thick pieces fit between the motor and the frame, F side to frame.
Thin pieces go on the underside of the frame, f side to frame, to align the bolts with the upper wedge.
Printing Stats
| 10Deg_Motor_Mount_v2.stl | Time: 1h 55m 6s | Filament used: 1.42712m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.