DJI Inspire 1 suitcase replacement part by bgill
See all models by bgill
Download All FilesDownload Individual Parts
Description
After a couple of months the grip of my DJI Inspire case broke off. The plastic parts with which the rubber grip is screwed to the suitcase is done very cheap.
Options were buy a new suitcase or replace the part. I decided for the 2nd option.
Options were buy a new suitcase or replace the part. I decided for the 2nd option.
On the photo you see the black part which broke (and I glued together to measure), a green ABS print of the design and a print in Taulman’s T-Gaze filament which I used for the final prints, because of it’s strength.
The parts are screwed with M2.5 Screws of 20 mm and 25 mm and a washer to the suitcase.
I recommend printing the part with the top side down.
Printing Instructions
No printing instructions provided by creator
Printing Stats
| Inspire_Suitecase_Replacement.stl | Time: 0h 41m 13s | Filament used: 0.41928m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.