ODST front for Halo magnum by Nintendstroid
See all models by Nintendstroid
Download All FilesDownload Individual Parts
Description
added a split up version between the silencer and the lasersight for easier printing
V2, old verion was a bit too tight.
Added a version where the hole is closed so it will look better
Untested!
should clip right on in stead of the normal laser sight. Added space for a small torch or laser on the bottom
Haven’t printed it yet,
the holes of the gun don’t exacly line up but that couldnt be helped.
V2, old verion was a bit too tight.
Added a version where the hole is closed so it will look better
Untested!
should clip right on in stead of the normal laser sight. Added space for a small torch or laser on the bottom
Haven’t printed it yet,
the holes of the gun don’t exacly line up but that couldnt be helped.
Printing Instructions
No printing instructions provided by creator
Printing Stats
| ODST_FRONT_V2_.stl | Time: 24h 52m 28s | Filament used: 23.7462m |
| ODST_FRONT_V2_HOLE_FILLED_.stl | Time: 24h 55m 59s | Filament used: 23.7781m |
| top_closed_hole.stl | Time: 16h 22m 10s | Filament used: 15.864m |
| bottom_.stl | Time: 9h 21m 20s | Filament used: 8.53567m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.