bracket by kbokowy
See all models by kbokowy
Download All FilesDownload Individual Parts
Description
A simple design that holds two boards up with a presure fit. The boards would have to be 1/8 inch thick.
Printing Instructions
when you print make sure there is tape on the build plate because it rises up.
Printing Stats
| holder6.stl | Time: 0h 0m 22s | Filament used: 0.0101245m |
| holder8.stl | Time: 0h 0m 22s | Filament used: 0.0101345m |
| holder4.stl | Time: 0h 0m 22s | Filament used: 0.0101345m |
| holder3.stl | Time: 0h 0m 22s | Filament used: 0.0101345m |
| holder2.stl | Time: 0h 0m 22s | Filament used: 0.0101345m |
| holder10.stl | Time: 0h 0m 22s | Filament used: 0.0101245m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.