3/8″ (1cm) hose to drip chamber connector by gbizzotto
See all models by gbizzotto
Download All FilesDownload Individual Parts
Description
This connector allows one to plug 4 drip chambers (the hospital thing) into a water reservoir with a standard 3/8″ hose.
Handy to provide drip irrigation to your flowers while you’re traveling, or to just be able to fill the tank and forget it for a week or two.
The object comes with a cylinder that should be printed with a flexible material (I use ninja flex), so that it can be fitted in, and seals, the plugs.
The drip chambers are expected to have a 5mm diameter connector.
To be water-tight, the object should receive treatment with acetone if printed with ABS, heat treatment if printed with PLA.
More on how to use it at http://www.instructables.com/id/Drip-irrigation-3/.
Handy to provide drip irrigation to your flowers while you’re traveling, or to just be able to fill the tank and forget it for a week or two.
The object comes with a cylinder that should be printed with a flexible material (I use ninja flex), so that it can be fitted in, and seals, the plugs.
The drip chambers are expected to have a 5mm diameter connector.
To be water-tight, the object should receive treatment with acetone if printed with ABS, heat treatment if printed with PLA.
More on how to use it at http://www.instructables.com/id/Drip-irrigation-3/.
Printing Instructions
http://www.instructables.com/id/Drip-irrigation-3/
Printing Stats
| drip_champer_plug_04.stl | Time: 0h 12m 50s | Filament used: 0.187798m |
| hose_conector_9.stl | Time: 4h 17m 54s | Filament used: 3.25666m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.