Desk Wire Grommet by albertk836
See all models by albertk836
Download All FilesDownload Individual Parts
Description
Wire grommet for small cables, ie. network cables, 2 wire power cords, etc. Hole in the counter/desk needs to be 1.25″
Printing Instructions
The unit is made in 3 pieces without Raft or Support. All three parts fit together without any glue with my printers. I made them fit tight together but if your printer is lighter on filament (Feed Rate), glue would be fine. I created mine with PLA just to insure they print flat. Also used .3mm layer height and 10% fill to print fast, (less than 15 minutes for each part.)
Printing Stats
| Desk_Plate.stl | Time: 0h 38m 53s | Filament used: 0.561344m |
| Desk_Cover.stl | Time: 0h 18m 37s | Filament used: 0.282308m |
| Desk_Tube.stl | Time: 0h 34m 54s | Filament used: 0.390646m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.