Simple Hook by DC010

See all models by DC010

Download All Files
Download Individual Parts
Just a basic hook made for my wife for holding bags.

Chamfered for screws to sit flush.

Edit: Added one w/ a little under support and a wider one for command strips.

Never had a failure, but realized having it curved under wasn’t doing it any favors, but made it hollow so you can hang something from it as well.

Printing Instructions
Designed with a 40mm internal diameter with a slight inward hook.

Mine is printed in ABS with .3 layers, 15% infill, and 2 shells.

Your application may vary, so just estimate the density you need for your application.

Printing Stats
Simple_Hook.stl Time: 1h 5m 41s Filament used: 1.02362m
Simple_Hook_2.stl Time: 1h 48m 29s Filament used: 1.66281m
Simple_Hook_3.stl Time: 2h 25m 33s Filament used: 2.34017m
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.