Americanized universal bottle top tripod by Crapeye
See all models by Crapeye
Download All FilesDownload Individual Parts
Description
Same idea as the universal bottle top tripod (http://www.thingiverse.com/thing:33940) except it uses SAE hardware. 1/4 inch carriage bolts and nuts and no gluing of parts.
Bottom pivot may receive a minor update when I find the time.
Printing Instructions
Print one of each with the thumb covers being optional (you can substitute wing nuts if you like.).
You will need a 1/4 inch carriage bolt @ 1.5″ in length another 1/4 inch carriage bolt @ 4″+ depending on the size of your device. (iPhone 5 in landscape uses the 4″ as a benchmark, I’ve found sizes up to 7 inches.) 3-4 nuts that work with the bolts and some short screws (drill 2 pilot holes into the bottom pivot and cap, and use screws to attach it to the bottle cap.) The pictures explain the rest of the assembly.
Printer settings 0.25 per layer with PLA on an Afinia h479.
Printing Stats
| Middle_nut_thumb_cover.stl | Time: 0h 10m 50s | Filament used: 0.155543m |
| Side_thumb_nut_cover.stl | Time: 0h 14m 0s | Filament used: 0.181623m |
| Bottom_clamp.stl | Time: 0h 22m 26s | Filament used: 0.321437m |
| Bottom_pivot.stl | Time: 1h 0m 23s | Filament used: 0.789733m |
| Top_pivot.stl | Time: 0h 51m 2s | Filament used: 0.691328m |
| Top_clamp.stl | Time: 0h 31m 11s | Filament used: 0.452016m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.