Mix and Match Ornament by larry009

See all models by larry009

Download All Files
Download Individual Parts
This is a modular bauble ornament allowing you to make a variety of different ornaments from the same collection of pieces.
By varying the colors and choosing which add-ons to stick onto the ball you can create many different baubles that can hang on a tree.

Printing Instructions
This print was made on a MakerBot Replicator 2.
I scaled every piece by 120% but you can go higher.
Try to print the add-ons and pegs at the highest resolution.
The ball, top and bottom work well at 0.15 mm.
There is a snap-fit peg used for connecting the top and bottom to the ball.
The snowflakes have their “snug-fit” pegs built in but the other add-ins have separate pegs to push in. You may have to do a bit of sanding on the pegs if they are too tight.
Printing Stats
snap_fit_peg.stl Time: 0h 0m 58s Filament used: 0.021873m
star.stl Time: 0h 2m 37s Filament used: 0.0418467m
bottom.stl Time: 0h 0m 0s Filament used: 0m
peg_for_addons.stl Time: 0h 0m 36s Filament used: 0.0128823m
snowflake_simple.stl Time: 0h 2m 6s Filament used: 0.0426358m
ball.stl Time: 1h 26m 14s Filament used: 1.50902m
snowflake_fancy.stl Time: 0h 2m 44s Filament used: 0.0418521m
snowman.stl Time: 0h 1m 47s Filament used: 0.0302182m
top.stl Time: 0h 25m 57s Filament used: 0.342078m
holly.stl Time: 0h 3m 1s Filament used: 0.0472117m
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.