Calibration of extruders of reprap Mendel tricolor by Fons

See all models by Fons

Download All Files
Download Individual Parts
The position of the three extruders have to be checked now and then as position can change trough use and while adjusting height (tilting of extruder)
With the calibration plate one can measure if position stored in printer (can be seen with sending command M503 to printer) is OK or has to be changed. In Picture you can see that the blue square is to much to the right. So X position of third extruder has to be adjusted for -2 mm. You can set the correct offsets using G10 P2 X-33.7 Y3.2 Z0 (example)

See also

Printing Instructions
No printing instructions provided by creator
Printing Stats
first_extruder.stl Time: 0h 22m 21s Filament used: 0.326422m
second_extruder.stl Time: 0h 13m 27s Filament used: 0.187064m
third_extruder.stl Time: 0h 11m 13s Filament used: 0.164038m
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.