Sunhokey Acrylic Prusa I3 X Axis Carriage by 13DjjC13

December 25, 2022 2 mins read3D Printer Parts
See all models by 13DjjC13


Download All Files
Favorite
Download Individual Parts
hotend_clamp.STL

belt_clamp.STL

x_carriage.STL

Tailstock.STL

Description
The stock carriage offers a very weak hotend mount and causes vibrations. This replaces that carriage.

!!! ENSURE YOU RE-ZERO YOUR Z STOP BEFORE HOMING PRINTER!!!

New solidworks files allow for a set of modifications.

– added head magnets for accessories
– hot-swappable hotend attachment
– new mount for a small engraving tool
– smaller width to allow for more bed coverage

Printing Instructions
Print one x carriage, 1 hotend mount, and 2 belt clamps

These parts should all print without support material.

You need to buy 2 M4 x 40mm screws to install hotend and 4 M3 x 12mm screws for belt clamps

!!! ENSURE YOU RE-ZERO YOUR Z STOP BEFORE HOMING PRINTER!!!

ASSEMBLY TIPS:

Install carriage to linear bearings first with 4 screws at top and 2 lowest screws at bottom.

Press hotend into hotend clamp and slide into place.

Use 2 M4 x 40mm screws to pass through carriage into pillow block and clamp hotend firmly. (2 reliefs in hotend clamp to allow the trapping of hotend wires to prevent strain)

Loosen x axis belt tensioner fully before the next step!

Install belt on back side of printer with 2 belt clamps and 4 M3 x 12mm screws.

Printing Stats
hotend_clamp.STL Time: 0h 41m 24s Filament used: 0.573018m
belt_clamp.STL Time: 0h 5m 35s Filament used: 0.0865262m
x_carriage.STL Time: 4h 35m 31s Filament used: 4.01631m
Tailstock.STL Time: 605h 25m 14s Filament used: 755.108m
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.