Z adjustable endstop for 6 and 8mm rods by MrArrow1961
See all models by MrArrow1961
Download All FilesDownload Individual Parts
Description
Made from ABS
Screws:
M3 – L 8mm – 3pcs
M3 – L 20mm – 1pcs
M3 – L 25mm – 1pcs
M3 nut – 1pcs (its made round on diamond disk and glue up by super glue to the end of bolt thread (middle green part)
Threads on ABS done by tool
Switch and knob must be glue up by superglue.
White part must be finalized by file.
Heat up screw L25mm on candle up to 120C and push it to printed knob to make its future place to glue up.
Screws:
M3 – L 8mm – 3pcs
M3 – L 20mm – 1pcs
M3 – L 25mm – 1pcs
M3 nut – 1pcs (its made round on diamond disk and glue up by super glue to the end of bolt thread (middle green part)
Threads on ABS done by tool
Switch and knob must be glue up by superglue.
White part must be finalized by file.
Heat up screw L25mm on candle up to 120C and push it to printed knob to make its future place to glue up.
Printing Instructions
No printing instructions provided by creator
Printing Stats
| z_nastroyka.stl | Time: 1h 2m 34s | Filament used: 0.821603m |
| z_nastroyka3.stl | Time: 1h 41m 45s | Filament used: 1.09534m |
| z_nastroyka_for_8_mm_rod.stl | Time: 1h 13m 33s | Filament used: 0.98626m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.