Minimalistic Filament Spool by crattat
See all models by crattat
Download All FilesDownload Individual Parts
Description
I had some filament without spool and needed one that can be quickly done. Thus I decided to create a very minimalistic one myself. You just need a few M3x16-mm-screws, washers and nuts. The inner tube sits strong in the ring, if not, you can glue the two rings.
The spool is not super strong, but it doesn’t need to. I Just printed it with 35% infill and 0.4 mm walls with PLA/PHA.If anything breaks I will do it again with stronger walls and more infill. But it seems it’s quite good already.
It fits on the original UMO spool holder, but it’s larger than the normal spools and keeps the filament a lot less bent.
Printing Instructions
No printing instructions provided by creator
Printing Stats
| Ultimaker-Reel-Holder-Baseplate.stl | Time: 1h 47m 28s | Filament used: 1.28454m |
| Ultimaker-Reel-Holder-Arm-2.stl | Time: 0h 0m 0s | Filament used: 0m |
| Ultimaker-Reel-Holder-Arm.stl | Time: 0h 0m 0s | Filament used: 0m |
| Ultimaker-Reel-Holder-Tube.stl | Time: 2h 40m 40s | Filament used: 2.01454m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.