Filament spool holder with bearings. by Ferdi1988
See all models by Ferdi1988
Download All FilesDownload Individual Parts
Description
A simple Filament Spool Holder for the K8200.
But fits all 3D printers if you make a bracket.
Fits spools from 30mm to 60mm
But fits all 3D printers if you make a bracket.
Fits spools from 30mm to 60mm
All you need is:
M6 threaded rod
2 M6 washers
M6 nut
2 M6 cap nuts
25 mm M6 washer
35 mm M6 washer
1 thumbscrew
2 bearings 6000-2RSH SKF
Principal Dimensions
Inside diameter: 10mm
Outside diameter: 26mm
Width: 8mm
Printing Instructions
No printing instructions provided by creator
Printing Stats
| lagerbus.stl | Time: 0h 12m 0s | Filament used: 0.130342m |
| spoolbusing.stl | Time: 2h 57m 54s | Filament used: 2.93857m |
| spoolbusing2.stl | Time: 1h 53m 27s | Filament used: 1.7438m |
| lockring.stl | Time: 0h 47m 24s | Filament used: 0.638476m |
| rollerbuis.stl | Time: 6h 4m 55s | Filament used: 4.95821m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.