Adjustable Led lighting for K8200 by RobinSt
See all models by RobinSt
Download All FilesDownload Individual Parts
Description
Adjustable extruder led lighting, uses 3 parts (5cm) of a standard adhesive 12V white led strip.
Its mounted by an adjustable joint on the unused extruder screw.
Its mounted by an adjustable joint on the unused extruder screw.
Note:
That the knee should fit very tightly thru the slot in the box, and it may be filled down a little bit and pressed in place.
A hole should be drilled at the most convenient place to connect the wiring.
Printing Instructions
No printing instructions provided by creator
Printing Stats
| LEDlightguide.stl | Time: 0h 8m 58s | Filament used: 0.121358m |
| LEDlightbox.stl | Time: 0h 15m 20s | Filament used: 0.206752m |
| LEDlightknee.stl | Time: 0h 4m 5s | Filament used: 0.0620235m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.