Filament Holder for Metamaquina by gtorelly
See all models by gtorelly
Download All FilesDownload Individual Parts
Description
This is a filament holder I made for my Metamaquina 2. It snaps right on the top of my printer without any screws or assembly/disassembly.
Printing Instructions
Just print the two supports and they should be ready to go.
I used a 12 mm aluminum tube for the holding the spool, but I also included an STL for printing your own pin, in case you don’t have a suitable tube.
The files are exactly the same, but you can print one at a time using the “Single” version or both at the same time using the “Double”.
I’ve had some issues with warping, so I would recommend printing one at a time, but if you have solved all your warping issues, just print them both at the same time.
Printing Stats
| FilamentSupportSingle.stl | Time: 1h 15m 12s | Filament used: 1.03088m |
| FilamentSupportDouble.stl | Time: 2h 32m 39s | Filament used: 2.05909m |
| Pin.stl | Time: 1h 45m 46s | Filament used: 0.550788m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.