Overlord Pro wire chafe guard by Av8er
See all models by Av8er
Download All FilesDownload Individual Parts
Description
On the Overlord and Overlord Pro, wires can chafe against the metal shield around the top of the hot end. This object protects the wire bundle from the sharp edges of the shield.
Printing Instructions
Print at 0.1 mm, no support needed.
remove the 4 screws holding the shield on, and snap in from inside the shield. ( The two screws closest to the angled fan don’t need to be removed)
Reinstall shield: tighten the side with two screws first, then the side screws.
remove the 4 screws holding the shield on, and snap in from inside the shield. ( The two screws closest to the angled fan don’t need to be removed)
Reinstall shield: tighten the side with two screws first, then the side screws.
Printing Stats
| Overlord_Wire_Guide.stl | Time: 0h 13m 5s | Filament used: 0.169026m |
Buy This Printed
Instead of downloading everything and 3D printing it yourself, let us handle it! All printable pieces will be 3D printed by either us, or a trusted manufacturing partner, and then shipped right to your doorstep with no hassle.
Click here to learn more about printing through Lagoon.
Click here to learn more about printing through Lagoon.